Show page

Differences

This shows you the differences between two versions of the page.

--- iothings:proiecte:2023:smartlock [2024/01/16 10:59]
cristina.mustatea adding web app photos
+++ iothings:proiecte:2023:smartlock [2024/01/16 11:17] (current)
cristina.mustatea removed "datasheet"
@@ Line 5: / Line 5: @@
 Git Repo: https://github.com/cozzoo/SmartLock.git\\
 Video Demo:https://drive.google.com/file/d/1CLmVIQDFO4Gkl8qLKqH47F718Nh1zUgw/view?usp=sharing\\
-Slides: https://docs.google.com/presentation/d/15u2QfCTyhC0O2Ejqf5nhIk7VQ9atWrWkD72XmPtRX9A/edit?usp=sharing\\
+Slides: https://docs.google.com/presentation/d/1a5u2QfCTyhC0O2Ejqf5nhIk7VQ9atWrWkD72XmPtRX9A/edit?usp=sharing\\
 ----
 === Project Description ===
@@ Line 16: / Line 16: @@
   * Power Source - rated 12V & 2A\\
   * 12V White LED
-  * L289N Motor Driver Module (**datasheet**): https://www.handsontec.com/dataspecs/module/L298N%20Motor%20Driver.pdf\\
+  * L289N Motor Driver Module: https://www.handsontec.com/dataspecs/module/L298N%20Motor%20Driver.pdf\\
   * Prototyping board, soldering and jumpers
   * One 50kOhm resistor
-{{ :iothings:proiecte:2023:smartlock.png?direct&300 |}}
+{{ :iothings:proiecte:2023:smartlock.png?direct&700 |}}
 \\
 ----
 === Project Setup ===
 I used a simple plastic storage container with 2 drawers to be able to easily create my prototype. I also chose this model to be able to drill through the plastic and arrange my components to it's design is more pleasant. \\
-I hid the ESP controller, the LED and the motor driver under this top lid. I wanted to be able to still access the board in case modifications to the Arduino sketch needed to be done.
+I hid the ESP controller, the LED and the motor driver under this top lid. I wanted to be able to still access the board in case modifications to the [[https://github.com/cozzoo/SmartLock/blob/main/ESP32Sketch/SmartLock-ESP.ino | Arduino sketch]] needed to be done.
 {{ :iothings:proiecte:2023:20240105_172522.jpg?direct&300 |}} \\
 In the back of the container, I have the input for the 12V power source, as well as the Reed sensor which registers whether or not the door has been opened. The initial Reed sensor broke after I initially added it. I has a spare 3-pin module. After connecting it I saw it worked without a problem, so I chose to leave it as it was.
@@ Line 49: / Line 49: @@
   * **switch_state**: monitors the state of the Reed sensor
 == App Architecture ==
-{{ :iothings:proiecte:2023:webapp.drawio.png?direct |}} \\
+{{:iothings:proiecte:2023:webapp.drawio.png?direct&700|}}\\
 == Web App ==
 The web app was created using HTML, CSS and JavaScript.\\
 \\ Users can chose to activate/deactivate the **Home Away** mode.
 {{ :iothings:proiecte:2023:homeaway.png?direct |}} \\
-{{:iothings:proiecte:2023:hoverunlock.png?direct|}}
+{{:iothings:proiecte:2023:hoverunlock.png?direct|}} \\
-{{ :iothings:proiecte:2023:hoverlocked.png?direct|}}
+{{:iothings:proiecte:2023:hoverlocked.png?direct|}}
 \\ **Unlock** commands are possible with just the press of a button.
 ----
-=== Conclusion ===
+=== Conclusions ===
+I enjoyed making this prototype. I also learned a lot about the ESP32 controller and the interconnectivity it has with other platforms. It is cheap and reliable, while delivering suitable functionalities for an IoT project.
 ----
 === Further Work ===
@@ Line 66: / Line 66: @@
 === Other Resources ===
 Followed this tutorial to create my initial web app: https://randomnerdtutorials.com/esp32-firebase-web-app/#install-nodejs.
+----
+=== Bibliography ===
+https://firebase.google.com \\
+https://firebase.google.com/docs/database/web/read-and-write#web-namespaced-api_3