Show page

Differences

This shows you the differences between two versions of the page.

--- iothings:laboratoare:2025:lab5 [2025/10/22 10:51]
dan.tudose
+++ iothings:laboratoare:2025:lab5 [2025/10/28 11:35] (current)
dan.tudose [Switch as a Sleepy ED]
@@ Line 1: / Line 1: @@
-====== Lab 5. Zigbee ======
+====== Lab 5. Zigbee Networking ======
 Zigbee is a low‑power, low‑data‑rate wireless protocol for building sensor/actuator networks (home automation, smart energy, lighting, industrial monitoring). It sits on top of IEEE 802.15.4 radios and adds networking, security, and application profiles.
@@ Line 184: / Line 184: @@
 <code bash platformio.ini>
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; See https://docs.platformio.org/page/projectconf.html for details.
 [platformio]
 default_envs = sparrow-switch
@@ Line 200: / Line 209: @@
   ;-D CORE_DEBUG_LEVEL=5
-; Use a partitions.csv that contains Zigbee NV partitions
+; Use a partitions.csv that contains Zigbee NV partitions (see step 2)
 board_build.partitions = partitions.csv
@@ Line 210: / Line 219: @@
   -D ZIGBEE_MODE_ED
   -D SPARROW_SWITCH
+  -D CONFIG_ZB_ENABLED=1
+  -L$PLATFORMIO_PACKAGES_DIR/framework-arduinoespressif32-libs/esp32c6/lib
+  -lesp_zb_api.ed
+  -lzboss_stack.ed
+  -lzboss_port.native
+  -lzboss_port.remote
 [env:sparrow-light]
@@ Line 216: / Line 231: @@
   -D ZIGBEE_MODE_ROUTER
   -D SPARROW_LIGHT
+  -D CONFIG_ZB_ENABLED=1
+  -L$PLATFORMIO_PACKAGES_DIR/framework-arduinoespressif32-libs/esp32c6/lib
+  -lesp_zb_api.zczr
+  -lzboss_stack.zczr
+  -lzboss_port.native
+  -lzboss_port.remote
 lib_deps =
   adafruit/Adafruit NeoPixel@^1.12.0
 </code>
-When building and deploying on the two nodes, switch between ''sparrow-switch'' and ''sparrow-light''.
+When building and deploying on the two nodes, switch ''default_envs'' between ''sparrow-switch'' and ''sparrow-light''.
 Keep the same partitions.csv file.
@@ Line 229: / Line 251: @@
 [[iothings:laboratoare:2025_code:lab5_2|Click here to get the code for this example.]]
+====== Switch as a Sleepy ED ======
+The previous example has the downside that the ED can be battery powered, but the code is not particularly optimized for energy saving. As a regular user will not press the switch more that a dozen times a day, it makes a lot of sense to keep the switch ED in deep sleep and wake only when the button is pressed. waking from deep sleep equates to having a hardware reset, so we will need to persist switch logic into the non-volatile RTC memory. This is all handled in the code below.
+[[iothings:laboratoare:2025_code:lab5_3|Click here to get the code for this example.]]
+<note>**Assignment 1:**
+Use the on-board BME680 sensor to switch lights on/off depending on the switch temperature instead of pushing a button. For example, if the temperature is above 25 degrees C, the light should turn on.
+</note>
+<note>**Assignment 2:**
+Encode more than simple on/off behavior from the switch. For example, a press toggles, and a hold dims up/down. Add a long-press detector on GPIO 9 and send MoveWithOnOff / Stop commands; on the bulb, implement Level Control callbacks to set NeoPixel brightness with transition times.
+</note>
+<hidden>
+Pentru asistenți: la laboratorul ăsta o să aveți nevoie de un gateway Home Assistant cu stick Zigbee Coordinator atașat. Dacă nu aveți așa ceva, întrebați-l pe Dan Tudose.
+</hidden>