Show page

Differences

This shows you the differences between two versions of the page.

--- iothings:laboratoare:2025:lab1 [2025/09/28 17:45]
dan.tudose
+++ iothings:laboratoare:2025:lab1 [2026/03/05 16:32] (current)
mihnea.dinica Ordering
@@ Line 1: / Line 1: @@
-===== Lab 1: Getting Started ======
+===== Lab 1. Getting Started. WiFi Basics ======
 ===== Necessary gear =====
-We will be using the [[https://github.com/FarhadGUL06/esp32-c6-sparrow/tree/main| ESP32-C6 Sparrow]] board as the main development board for the lab assignments.
+We will be using the [[https://github.com/dantudose/ESP32-Sparrow-rev3/| ESP32-C6 Sparrow]] board as the main development board for the lab assignments.
-{{:iothings:laboratoare:2025:20250925_131952.png?750| }}
+{{ :iothings:laboratoare:2025:sparrow_rev3.png?750|}}
 Also, for the most of the labs, we will be using the Visual Studio Code and Platformio environment, which you can download from  [[https://platformio.org/|here]]
@@ Line 15: / Line 15: @@
 This is the pinout diagram of the development board:
-{{:iothings:laboratoare:2025:esp32-c6-sparrow-pinout.png?800|}}
+{{ :iothings:laboratoare:2025:esp32-c6-sparrow-pinout_v3-1.png?800|}}
 ===== First Steps =====
@@ Line 23: / Line 22: @@
-After downloading and installing the PlatformIO extension, create a new project using any ESP32-C6 board. After project creation, you will need to edit the platformio.ini file and replace it with the following:
+After downloading and installing the PlatformIO extension, create a new project using any ESP32-C6 board (be sure to have the Framework set to Arduino and not Espidf). After project creation, you will need to edit the platformio.ini file and replace it with the following:
 <code bash platformio.ini>
@@ Line 270: / Line 269: @@
-=== 6. Web Server ===
+=== 5. Web Server ===
 Now let's bring everything together and configure the board to connect to our local WiFi, act as a web server and display a dynamic html page in which it can plot the sensor readings.