• Author: Valentin Radu
• Email: valentin.radu@valinet.ro
• Master: SRIC
• Demo

This project implements two functionalities for my smart home setup:

• Smart Air Conditioning
• Speaker volume control using TV remote

Both tasks are centered around an ESP32-WROOM board.

The goal for this task was to be able to smart control the AC unit that I have in my home, bypassing the included remote control. The end goal was to have them controlled from anywhere around the globe.

The AC units are Bosch Climate 3000i  . These are actually manufactured by Midea and sold under the Bosch brand in Romania  . The units feature an OEM dongle option, but the functionality is limited and it comes with a steep price  .

The logic board of the AC is hidden away by a plastic tray underneath the front lid. A standard Phillips screw and a set of plastic clips hold the tray and have to be carefully removed. The logic board features a female USB-A receptacle. Despite this, the electrical wiring is not for USB, but for UART  . Communication with the AC unit can happen over this port using the Midea protocol      .

For this task, I have decided to use an ESP32 board which is wired for communication to the UART port on the AC unit logic board. I have determined that both boards use the same logic voltage levels, so there is no need for level shifters when wiring the RX/TX pins. Since some of the commands of the protocol do not work over the UART connection, I have also connected a standard 940nm infrared LED to the board, through which the remote control's commands are replicated in order to send the unsupported commands. I decided for this hybrid solution instead of going with the IR alone since the UART communication also offers feedback about the current status of the AC unit (current room temperature and other sensor data, for example).

• USB red wire (USB 5V) > ESP32 5V pin
• USB green wire (USB D+) > ESP32 GPIO1 (TX) pin
• USB white wire (USB D-) > ESP32 GPIO3 (RX) pin
• USB black wire (USB GND) > ESP32 GND pin
• IR LED long pin > ESP32 GPIO19 pin
• IR LED short pin > ESP32 GND pin

Since a standalone dashboard would introduce too much friction, I have decided to have this board connected to my WiFi network and integrate it with my Home Assistant setup as an additional “service”. This is best achieved by writing an ESPHome description file and having the framework glue modules together in order to produce the desired functionality. Getting a usable prototype is accelerated compared to the traditional approach of writing boiler code that links various libraries together at a high level. ESPHome is a mature ecosystem supported by Nabu Casa, the same team that delivers the world renowned Home Assistant ecosystem.

–>

esphome:
  name: ac-esp
  friendly_name: AC_ESP

esp32:
  board: esp32dev
  framework:
    type: arduino

logger:
  baud_rate: 0

api:
  encryption:
    key: "fjkhgusyfhygskfhgbvfxkhvbjkdhgxukhxkghxkxrg="

ota:
  password: "d76v87687db8ebmdbfjdjb8d789bdbd7"

wifi:
  ssid: REPLACE_WITH_YOUR_SSID
  password: REPLACE_WITH_YOUR_PASSWORD

  ap:
    ssid: "Fallback Hotspot"
    password: "473958869456"

uart:
  tx_pin: 1
  rx_pin: 3
  baud_rate: 9600

remote_transmitter:
  pin: GPIO19                       # For iot-uni-stick.
  carrier_duty_percent: 50%         # 50% for IR LED, 100% for direct 
                                    # connect to TSOP IR receiver output.

climate:
  - platform: midea
    name: AC_ESP               # Use a unique name.
    period: 1s                  # Optional
    timeout: 2s                 # Optional
    num_attempts: 3             # Optional
    autoconf: true              # Autoconfigure most options.
    beeper: false               # Beep on commands.
    visual:                     # Optional.
      min_temperature: 17 °C    # min: 17
      max_temperature: 30 °C    # max: 30
      temperature_step: 1 °C  # min: 0.5
    supported_modes:            # Optional. 
      - FAN_ONLY
      - HEAT_COOL
      - COOL
      - HEAT
      - DRY
    custom_fan_modes:           # Optional
      - SILENT
      - TURBO
    supported_presets:          # Optional. 
      - ECO
      - BOOST
      - SLEEP
    custom_presets:             # Optional.
      - FREEZE_PROTECTION
    supported_swing_modes:      # Optional
      - VERTICAL
      - HORIZONTAL
      - BOTH
    outdoor_temperature:        # Optional. 
      name: Temp

switch:
  - platform: template
    name: Beeper
    icon: mdi:volume-source
    restore_mode: 'RESTORE_DEFAULT_OFF'
    optimistic: true
    turn_on_action:
      midea_ac.beeper_on:
    turn_off_action:
      midea_ac.beeper_off:

binary_sensor:
  - platform: status
    name: Connection Status
    id: climate_AC_ESP_connection_status

text_sensor:
  - platform: template
    name: Uptime
    id: uptime_human
    icon: mdi:clock-start

  - platform: version
    name: ESPHome Version
    id: climate_AC_ESP_esphome_version

  - platform: wifi_info
    ip_address:
      name: IP
      id: climate_AC_ESP_ip_address
      icon: mdi:ip-network

sensor:
  - platform: uptime
    name: Uptime Sensor
    id: uptime_sensor
    update_interval: 60s
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? to_string(days) + "d " : "") +
                (hours ? to_string(hours) + "h " : "") +
                (minutes ? to_string(minutes) + "m " : "") +
                (to_string(seconds) + "s")
              ).c_str();
  - platform: wifi_signal
    name: WiFi Signal
    id: climate_AC_ESP_wifi_signal
    update_interval: 60s

button:
  - platform: restart
    name: Reboot
    id: climate_AC_ESP_restart
    icon: "mdi:restart"
  - platform: shutdown
    name: Shutdown
    id: climate_AC_ESP_shutdown
  - platform: safe_mode
    name: Reboot (Safe Mode)
    id: climate_AC_ESP_safe_mode
  - platform: template
    name: Display Toggle
    id: climate_AC_ESP_display_toggle
    icon: mdi:theme-light-dark
    on_press:
      midea_ac.display_toggle:
  - platform: template
    name: Swing Step
    icon: mdi:tailwind
    on_press:
      midea_ac.swing_step:

←-

• ESP32-WROOM-S microcontroller

uint8_t i[];

const unsigned int t;

• https://ocw.cs.pub.ro/courses/iothings/laboratoare/2022/lab1