This is an old revision of the document!
Braille Printer
Introduction
This project implements a complete version of a braille printer. You just insert your sd card with the desired files, select the one you want, insert the paper, and the print is done!.
I picked this project based on one question:
What can I build using scrap i have in my house for some reason?
After searching inside some boxes I found the main part of an old printer. (the head that moves on the x axis in order to put the ink down)
So this project was (almost) built without paying for anything.
General Description
For this project to work I had to use two arduino uno boards (for gpio reasons).
Here is a list of every component:
* Arduino uno (the brain) - let's call it 1
* Arduino uno (the consumer) - let's call it 2
* ILI9341 2.8' LCD with touchscreen
Exemplu de schemă bloc: http://www.robs-projects.com/mp3proj/newplayer.html
Hardware Design
- listă de piese
- scheme electrice (se pot lua şi de pe Internet şi din datasheet-uri, e.g. http://www.captain.at/electronic-atmega16-mmc-schematic.png)
- diagrame de semnal
- rezultatele simulării
Software Design
- mediu de dezvoltare (if any) (e.g. AVR Studio, CodeVisionAVR)
- librării şi surse 3rd-party (e.g. Procyon AVRlib)
- algoritmi şi structuri pe care plănuiţi să le implementaţi
- (etapa 3) surse şi funcţii implementate
Rezultate Obţinute
Concluzii
Download
.
Fişierele se încarcă pe wiki folosind facilitatea Add Images or other files. Namespace-ul în care se încarcă fişierele este de tipul :pm:prj20??:c? sau :pm:prj20??:c?:nume_student (dacă este cazul). Exemplu: Dumitru Alin, 331CC → :pm:prj2009:cc:dumitru_alin.
Jurnal
Bibliografie/Resurse
