This is an old revision of the document!
Remote controlled box
Introduction
This project revolves around a box that can be opened remotely over a Wi-Fi connection. The box waits for a message to transition from the CLOSED to the OPEN state, or OPEN to CLOSED if it has transitioned previously. This message will be sent over Wi-Fi, from a computer through a local webpage.
General description
Initially, the box is in the CLOSED state, where the motor isn't being acted upon, it's display has the “LOCKED” text and the box is considered closed. After it receives the specific Wi-Fi message, the box plays a sound, the motor activates to lift up the cover of the box and the displayed message changes to “UNLOCKED”. A second message will revert to the initial state.
Hardware components:
- ESP32 DevKit
- Servo motor SG90
- Active buzzer 3V
- OLED 0.96” I2C Display
- USB cable
- Breadboard
- Dupont cables
- Accumulator 3,7V - 5000 mAh
Hardware Design
- listă de piese
- scheme electrice (se pot lua şi de pe Internet şi din datasheet-uri, e.g. http://www.captain.at/electronic-atmega16-mmc-schematic.png)
- diagrame de semnal
- rezultatele simulării
Software Design
- mediu de dezvoltare (if any) (e.g. AVR Studio, CodeVisionAVR)
- librării şi surse 3rd-party (e.g. Procyon AVRlib)
- algoritmi şi structuri pe care plănuiţi să le implementaţi
- (etapa 3) surse şi funcţii implementate
Rezultate Obţinute
Concluzii
Download
.
Fişierele se încarcă pe wiki folosind facilitatea Add Images or other files. Namespace-ul în care se încarcă fişierele este de tipul :pm:prj20??:c? sau :pm:prj20??:c?:nume_student (dacă este cazul). Exemplu: Dumitru Alin, 331CC → :pm:prj2009:cc:dumitru_alin.
Jurnal
Bibliografie/Resurse
