This is an old revision of the document!
Radar
Introducere
This project is meant to simulate a 2D representation of a radar. The ultrasonic sensor is going to be the emitter and receiver of signals for this project. The sensor is placed onto a servo that moves in a 180 degree arch which allows for somewhat accurate simulation of the real thing. The signals from the sensor go to the Arduino board, which in turn sends the signals to the lcd screen Which acts as our output device, which imitates the look of radar.
The first idea that i started from was from a forum post where someone mentioned a radar being made with an ultrasonic sensor. with someone showing a photo of a sensor and a servo in the comments.
It can be useful by scanning for approaching objects and alerting individuals visually from where the object is coming from and trough audio means, thus grabbing their attention.
Descriere generală
Hardware Design
Aici puneţi tot ce ţine de hardware design:
- Arduino uno
- LCD ST7735
- Ultrasonic sensor
- Buzzer
- Potentiometer
- buzzer
- wires
- rezistances
Schema electrica
Picture of project hardware
Software Design
- mediu de dezvoltare (if any) (e.g. AVR Studio, CodeVisionAVR)
- librării şi surse 3rd-party (e.g. Procyon AVRlib)
- algoritmi şi structuri pe care plănuiţi să le implementaţi
- (etapa 3) surse şi funcţii implementate
Rezultate Obţinute
Concluzii
Download
.
Fişierele se încarcă pe wiki folosind facilitatea Add Images or other files. Namespace-ul în care se încarcă fişierele este de tipul :pm:prj20??:c? sau :pm:prj20??:c?:nume_student (dacă este cazul). Exemplu: Dumitru Alin, 331CC → :pm:prj2009:cc:dumitru_alin.
Jurnal
Bibliografie/Resurse
