This Arduino-based system offers a convenient and customizable way to make delicious cocoa milk drinks at home. The project contains a smart liquid dispenser with a keyboard that allows the user to input the desired quantity of milk and a distance sensor that detects the presence of a cup to activate the powder dispensing mechanism. The idea behind this project was to simplify and automate the process of making these drinks and ensure consistent quality every time. MilkyWay Maker is a project that was born out of a love for milk-coffee beverages, such as Nescafe and Nesquik thus I strongly believe that this project is not only useful for coffee lovers, but also for those interested in learning about electronics and programming.

The user can input the desired quantity of milk using the keyboard, and the system dispenses the milk accordingly. The distance sensor detects the presence of a cup, activating the powder dispensing mechanism to add the cocoa powder. This ensures that the drink is prepared accurately and consistently every time.

The project is not only aimed at coffee lovers but also at those interested in learning about electronics and programming. It combines the functionality of Arduino, the convenience of automation, and the enjoyment of delicious milk-coffee beverages. The provided code includes various functionalities, such as reading the keypad inputs, controlling the servo motor, calculating the flow rate of milk, displaying information on an LCD screen, and playing beep sequences for notifications.

Below is the overall flow and explanation of the code. It combines input from the keypad, measurements from the ultrasonic sensor and flow sensor, and control of the water pump and servo motor to automate the process of dispensing milk based on the desired volume.

1. Include the necessary libraries for the keypad, LCD display, and servo motor( <Keypad.h>, <LiquidCrystal_I2C.h>, <Servo.h>) and define the pin connections for various components.
2. Declare global variables for pins, counters, calibration factors, and flags.
3. Call the setup() function to initialize the settings and configurations of the Arduino board and connected components. Set pin modes, attach interrupts, and initialize the LCD display.
4. Enter the loop() function, which is the main execution loop of the program. It continuously checks for inputs from the keypad and performs actions based on the input. It also checks for the presence of a cup using the ultrasonic sensor and controls the servo motor accordingly.
5. Read inputs from the keypad within the loop() function and accumulate them to form a volume value. Display the entered volume on the LCD display.
6. If the entered volume is within the specified range (1000 mL or less), enter the volume dispensing loop. Activate the water pump and calculate the flow rate using the flow sensor. Display the flow rate and cumulative volume dispensed on the LCD display and serial monitor.
7. If the total dispensed volume exceeds the entered volume, stop the water pump, display a message indicating that the desired volume has been reached, wait for a few seconds, and reset the process to allow a new measurement.
8. Call the pulseCounter() function, which is an interrupt service routine that increments a pulse count variable. It is triggered by the falling edge of the pulse from the flow sensor, indicating the flow of liquid.
9. Call the resetProcess() function to reset the variables and settings related to the flow measurement process. Clear the LCD display, set it to the initial state, and initialize the necessary variables.
10. Call the getDistance() function to measure the distance using the ultrasonic sensor. Send a trigger pulse and calculate the duration of the echo pulse to determine the distance. Return the distance value in centimeters.
11. Call the playBeepSequence() function to generate a beep sound using a buzzer. Play a sequence of three short beeps with a delay between them.

In conclusion, the development of the Milky Way Maker coffee maker machine using Arduino has been a successful project. It has demonstrated the potential of integrating electronics and programming into everyday appliances to automate processes and enhance functionality. The user-friendly interface, sensor integration, and customization options make it a versatile and enjoyable coffee-making experience. The project has provided valuable learning opportunities and highlights the possibilities for future innovation in home automation.

milkywaymaker.zip

• 15.05: Researched for a project theme
• 17.05: Decided on Milky Way Maker as the project (reflecting my love for chocolate drinks in general so I knew this was the one for me)
• 18.05: Ordered the components required for the project
• 21.05: Components arrived, began brainstorming the design and took a trip to IKEA to purchase a wooden box and recipients
• 23.05: Enlisted my dad's help in cutting the wood box and creating necessary indents for the pump hose and other components
• 26.05: Finally assembled all the components and completed the Milky Way Maker coffee maker machine

Export to PDF