This is an old revision of the document!
Mined Labirinth
Author: Mihai-Alexandru Mares
Group: 1221A
Faculty: FILS
Introduction
The game is played on a grid made of LEDs. At the start of the game, some LEDs will blink, indicating the positions of the exit, the key and the mines. The player's job will be to navigate through the grid, collect the key and reach the exit without hitting any bombs.
The goal of this project was to get myself used to programming an Arduino microcontroller and also to learn how to solder.
General Description
Input:
- Joystick which consists of 4 buttons (up; down; left; right)
Output:
- 6×6 LED matrix
- Buzzer
Hardware Design
List of components:
- Arduino Leonardo
- LEDS for the matrix (x36)
- Buttons (x4)
- Buzzer
- Jumper Cables
Schematic for how the LED matrix is wired together:
This specific configuration allows the control of the entire matrix using only 7 output pins.
I've also built a digital replica of this project on TinkerCad accessible at the link below: https://www.tinkercad.com/things/fZJAAXsfZli-swanky-snaget/editel?sharecode=0bbuIXbi3h2ZAVldh3UEmUbhqDcp3eWFfsQdjW7n0CM
Software Design
- mediu de dezvoltare (if any) (e.g. AVR Studio, CodeVisionAVR)
- librării şi surse 3rd-party (e.g. Procyon AVRlib)
- algoritmi şi structuri pe care plănuiţi să le implementaţi
- (etapa 3) surse şi funcţii implementate
Rezultate Obţinute
Concluzii
Download
.
Fişierele se încarcă pe wiki folosind facilitatea Add Images or other files. Namespace-ul în care se încarcă fişierele este de tipul :pm:prj20??:c? sau :pm:prj20??:c?:nume_student (dacă este cazul). Exemplu: Dumitru Alin, 331CC → :pm:prj2009:cc:dumitru_alin.
Jurnal
Bibliografie/Resurse
