Show page

Differences

This shows you the differences between two versions of the page.

--- pm:prj2022:apredescu:152 [2022/05/23 15:56]
david_ioan.stanescu [Journal]
+++ pm:prj2022:apredescu:152 [2022/05/23 17:49] (current)
david_ioan.stanescu [Download]
@@ Line 1: / Line 1: @@
 ====== Multifunction Device STANESCU-FLOREA David-Ioan ======
+ --- //[[david_ioan.stanescu@stud.fils.upb.ro|David-Ioan STANESCU-FLOREA (116583)]] 2022/05/23 17:48//
 ===== Introduction =====
@@ Line 57: / Line 58: @@
 ===== Conclusions =====
 This project was thought to be much like a multimeter - modular and with many uses.
+  * Please watch the demonstration video -> [[https://photos.app.goo.gl/sDCjmLzVembbbYsE9]]
 ===== Download =====
 <note warning>
 {{:pm:prj2022:apredescu:arduino_project_stanescu-florea_david-ioan.zip|}}
+ --- //[[david_ioan.stanescu@stud.fils.upb.ro|David-Ioan STANESCU-FLOREA (116583)]] 2022/05/23 17:48//
 </note>
-===== Journal =====
+===== User's Manual =====
 <note tip>
-User's Manual:
   - Connect the Arduino through the USB port using a computer or using the 5V special socket.
 <note important>Please do research before using the special powering socket because you might connect an improper PSU and risk to damage irreparably the device and its components</note>
@@ Line 79: / Line 81: @@
 <note important>To go from one mode to another, you must press once one of the buttons of the modes that ARE NOT IN USE! When the device is good to change modes, the message "CODE" will appear on the display.
   * If you are in the MODE 4, to reset the mode, you must LONG-PRESS the MIDDLE BUTTON - this will change to the Alarm-Clock Mode (both modes 4 and 5 are thought to be used together, so they are linked)
-  * If you are in the MODE 5,</note>
+  * If you are in the MODE 5, in order to reset the mode, go to the alarm-setting mode and LONG-PRESS the RIGHT BUTTON
 </note>
+<note warning>//Please note that the MODE 4 and MODE 5 have different uses for the buttons, so please read ahead//</note>
+<note important>**MODE 4 BUTTON MAP**:
+  - When in the MODE 4, the Yellow LED will turn on and will stay on until either Start/Stop the countdown
+  - By LONG-PRESSING the LEFT BUTTON when the counting is stopped/reached 0(notice the Red LED being turned on) you will reset the counter (and the Yellow LED will be turned on)
+  - By pressing the RIGHT BUTTON when the counter is either reset(or reached 0) or stopped, you will add 10sec to the counter
+  - By pressing the MIDDLE BUTTON when the counter is either reset(or reached 0) or stopped, you will add 60sec to the counter
+  * The display will prompt any modification done to the counter
+  * When the counter reaches 0, you can add seconds right away (notice that the Red LED will remain on to prompt that the stopwatch wasn't reset)
+  * **//To exit the Stopwatch Mode, LONG-PRESS the MIDDLE BUTTON//**
+</note>
+<note important>**MODE 5 BUTTON MAP**:
+  - When in the MODE 5, the display will prompt 12:00 in 24h-format
+  - By LONG-PRESSING the RIGHT BUTTON when showing the Hour or the Alarm-Hour, you will be able to modify the clock
+  - By LONG-PRESSING the LEFT BUTTON when the clock is showing the current time, you will activate/deactivate the alarm (see the top built-in Red LED turning on/off)
+  - By pressing the MIDDLE BUTTON you will be able to change between the clock and the set alarm
+  * The display will prompt any modification done to either the clock or the alarm
+  * **//To exit the Alarm-Clock Mode, go in alarm set mode (MIDDLE BUTTON) and LONG-PRESS the RIGHT BUTTON//**
+</note>
+ --- //[[david_ioan.stanescu@stud.fils.upb.ro|David-Ioan STANESCU-FLOREA (116583)]] 2022/05/23 17:47//
+</note>
 ===== Bibliography/Resources =====