— 1221B Denisa Florina Voicu

The scope of this project is to create a floor cleaning device that will make your cleaning days easier.This robot that resembles Roomba will have HC-SR04 ultrasonic distance sensors that will allow the robot to avoid obstacles so that it can move freely until the room is properly cleaned.It will also have an IR Module that will help it to avoid falling from stairs.

A robot that cleans your house's floor.The robot will have 3xHC-SR04 Ultrasonic Module on the sides and in the front that detect obstacles,also an IR Module to avoid falling down the stairs.The robot will be powered by a 7.4V Lithium-Ion Battery.Because the battery is too powerful we will use a voltage regulator to convert it to 5V.We switch the button to ON and the vacuum will start working after we cut the connection from the internal battery and power it from our power supply.For the motor driver, we connect the two enable pins to 5V and also the driver voltage pin to 5V because we are using 5V motors.

List of components:

• Arduino Micro
• HC-SR04 Ultrasonic Module x3
• L293D Motor Driver
• 5Volt N20 Motors x2
• N20 Motor Wheels x2
• Switch
• LM7805 Voltage Regulator
• 7.4V Lithium-Ion Battery
• IR Module
• Perfboard
• Castor Wheel
• Plastic Board
• Generic Portable Vacuum Cleaner

Electric scheme:

Export to PDF