Open the Labweek10-Topology.net file.

1. [0p] Verify hostnames and IP addresses to all routers, according to the given topology.
2. [+1=1p] Activate OSPF in the provider’s network. Run OSPF only on the interfaces between PE1, P and PE2 and on each provider router’s loopback interface.
3. [+1=2p] Enable MPLS on the physical interfaces in the provider’s network. Do not run MPLS on interfaces facing customer routers (CE1 and CE2).
4. [+3=5p] Create a VRF on both PE routers and bind them to the proper interfaces. Use the following parameters:
   1. VRF name: Client
   2. Route distinguisher: 1001:1
   3. Route-targets for import and export: 64512:1
5. [+3=8p] Configure an MPBGP neighbor relationship between the PE routers. Establish neighbor relationships using the loopback addresses of PE1 and PE2.
   1. AS number for BGP: 64512
6. [+2=10p] Enable RIPv2 between the CE routers and PE routers. Advertise both customer loopbacks in RIP and check each CE router for propagated routes.
7. [+1=11p] Using Wireshark capture traffic between P - PE1 and PE1 - CE1.