Connect the LED to the Edison following the schematics in the figure.
You will see, when you look at the LED, that it has two legs. One is longer, that one is usually the anode. The latter has to be plugged into the GPIO pin of the Edison. The shorter leg should to be connected to the resistor and then to the ground pin of the board. To understand the anode and the cathode of the LED, imagine these two following situations:
To sum it up, although the position of the resistor is not fixed, it can can either connect the ground to the cathode or the anode to the GPIO pin, the cathode should be connected to the ground to obtain the usually desired behaviour. Meaning you want the LED to light when the GPIO is set to HIGH and not to light when the GPIO is set to LOW. If you put the legs the other way around, the effect will be the opposite.
Let's see the same application in three different programming languages.
First, you can try it out in Visual Programming. Here's an example: The first two blocks will simply print on the screen the messages written inside them. The repeat while true blocks will create an endless loop. Inside it, there will be the blocks that turn on and off the LED on the chosen pin. There is also a delay block, which will insert here a pause of 0.5 seconds between the on state of the LED and the off one.
An important feature of Visual Programming in Wyliodrin is that you can easily get the Python code for your projects, just by clicking the Show code button.
from wyliodrin import * from time import * pinMode (0, 1) print('Led on pin 0 should blink') print('Press the Stop button to stop') while True: digitalWrite (0, 1) sleep ((500)/1000.0) digitalWrite (0, 0) sleep ((500)/1000.0)
First of all, you need to import the wyliodrin and time modules that will allow you to use some simple functions.
Firstly, you have to declare the pins you are going to use and their purpose. In this case, pin 0 is used as OUTPUT. This is what pinMode(0,1) does (1=OUTPUT, 0=INPUT).
Next, there are the print functions that simply write the text in the shell.
Another useful function is digitalWrite. The function receives as parameter the pin and the value. As you are doing a digital write, the value can be either 0 or 1. If the value is 0, the pin will have no current. If the value is 1, there is current.
The sleep function makes the program wait for the desired number of seconds.
All this code is enclosed within the while True loop that makes it to be run forever, until the application is stopped.
Now that you've seen both Visual and python, let's move on to Streams.
Streams is an inbuilt programming language used in Wyliodrin to create many complex IOT projects.
It is quite different from usual programming languages, and it can sometimes contain visual blocks as functions.
This programming language works not as an imperative one, but is based on data flow. The nodes will send messages to one another. You can look at these messages as JSON objects. Any message has two important fields: one will be the payload and a second one the topic.
You go to the Wyliodrin Applications page and create a new application. You name it and select the Streams programming language, then, the example Led Blink - Streams. This will create an application that makes an LED connected to the pin 2 of the Edison blink.
Once created, you click on the new application's name to open it. A new window will open to display it. In this example, the run node will send a message every 1 second to the node that says blink. Look in its settings. The payload field will be a number, incremented by one. The blink node is the one which holds the visual blocks. Double click on the latter to see the function inside. It will be in Visual Programming. What it does is to set a variable new message with the value of the data sent from this node to the next one to come. Now, the very message is composed like this: take the payload sent from the first node and divide it by 2. Which means the new message will be either 1 or 0. The function returns just one of these values, depending on the case. The last node is simply the digital write function. It will ask as a parameter the pin number, so double click on it and specify the pin you are going to use. On this pin, it will write the message that was previously composed.
Usually the longer leg is the anode and the shorted one is the cathode. However, this is not standard, to make sure which is which, you should know that the cathode leg is always connected to the bigger part inside the LED.
You can easily add a button to turn on and off the LED.
To connect it, just think about the button as a voltage divider, the same as for the thermistor. Look in the introduction to electronics to properly understand the concept.
You won't need to use more than 3 blocks.