Show page

Differences

This shows you the differences between two versions of the page.

--- sasc:laboratoare:08 [2016/04/26 12:47]
marios.choudary
+++ sasc:laboratoare:08 [2017/04/24 17:27] (current)
dan.dragan
@@ Line 1: / Line 1: @@
-===== Lab 08 - MACs =====
+===== Lab 08 - MACs, Hashes, OpenSSL =====
-In this lab we'll do some exercises with Message Authentication Codes.
+==== Exercise 1 - Timing attack ====
-==== Exercise 1 - Existential Unforgeability ====
-==== Exercise 2 - Timing attack ====
 In this exercise you will perform a timing attack against CBC-MAC.
@@ Line 19: / Line 15: @@
 <note important>
 The oracle's latency is subject to noise; for the best results, you may need to run each query multiple times (try 30) and compute the mean latency.
+</note>
+TODO1: Implement the CBC-MAC function.
+<note>
+To check your implementation of CBC-MAC is correct, verify that this (plaintext,tag) verifies fine:
+plaintext = 'Placinta de mere'
+tag = '07d2771038d62b94fce106cff957da0f'  (in hex, you need to apply decode to get a bytestream)
+</note>
+TODO2: Implement the MAC time verification attack and obtain the desired MAC without knowing the key.
+<note>
+Try to print the resulting tag in hex (with tag.encode(hex)). It should start with 51 and end with 81.
 </note>
@@ Line 32: / Line 42: @@
 from Crypto.Cipher import AES
 from Crypto.Hash import SHA256
+def slow_foo():
+    p = 181
+    k = 2
+    while k < p:
+        if p % k == 0:
+            return
+        k += 1
 def aes_enc(k, m):
   """
@@ Line 133: / Line 151: @@
   #1 - Do aes-CBC with k1 and iv=0, then keep only last block (last 16 bytes) of encryption
   #2 - Perform another AES encryption (simple, without CBC) on the last block from #1 using k2
-  # t = tag
+  #t = tag
   t = 16*'\x00'
@@ Line 147: / Line 165: @@
   for i in range(16):
     # Artificially extend byte comparison duration
-    time.sleep(0.1)
+    slow_foo()
     if tag[i] != goodtag[i]:
       return False
@@ Line 162: / Line 180: @@
   verify(message, tag)
-  # Step 2. Store the byte which caused the longest computation time
+  # Step 2. Store the byte that caused the longest computation time
   # Step 3. Continue the operation for each byte (except the last)
@@ Line 176: / Line 194: @@
 </file>
-==== Exercise 3 - Birthday attack ====
+==== Exercise 2 ====
-In this exercise you will perform a Birthday attack on SHA256.
+In this first exercise we'll see how to compute hashes using the OpenSSL command line interface.
-Your goal is to find two messages, $M_1$ and $M_2$, such that for the first **four** bytes $\mathsf{SHA256}(M_1) = \mathsf{SHA256}(M_2)$.
+You can interact with the OpenSSL utilities in two ways:
+  * directly from bash, by using the ''openssl'' command followed by the desired command and parameters
+  * from the OpenSSL console, by using the ''openssl'' command without additional arguments. You can close the console by calling ''quit'' or ''exit''.
-The collision will be $32$ bits long, which means you will need $2^{16}$ random messages in your attack. Note that the attack is not guaranteed to succeed; on average, two iterations of the attack are required to find a collision.
+If the manual pages are correctly installed, you can consult the documentation via ''man <command_name>'' (e.g. ''man md5'').
-TODO1: Implement the CBC-MAC function.
-TODO2: Implement the MAC time verification attack and obtain the desired MAC without knowing the key.
+Hashes are often used to check the integrity of downloaded files. We will now use OpenSSL to compute the MD5 and SHA-1 hashes of this page.
-<file python birthday.py>
+Download this page by running:
-import sys
+<code>
-import string
+linux$ wget http://ocw.cs.pub.ro/courses/sasc/laboratoare/09 -O sasc.html
-import base64
+</code>
-from Crypto.Hash import SHA256
-def raw2hex(raw):
+Use OpenSSL to compute the MD5 and SHA-1 hashes of the newly downloaded file; print the output in hexadecimal.
-    return raw.encode('hex')
+To check your results, you can use ''md5sum'' or ''sha1sum'' as an alternative way of computing the same hashes.
-def hex2raw(hexstring):
+==== Exercise 3 ====
-    return base64.b16decode(hexstring)
-hexdigits = '0123456789ABCDEF'
+In this second exercise we'll use the command line to compute an HMAC, with SHA-1 as the hashing algorithm.
-def hash(message):
+Recall from the lecture that for HMAC to be secure, we need to sample a random key $k \gets \mathcal{K}$.
-    h = SHA256.new()
-    h.update(message)
-    return h.digest()
+We can generate random bytes using ''openssl rand''. To compute HMACs, check the documentation for ''openssl dgst''.
-def main():
+For this exercise, use OpenSSL commands to:
-    # Try to find a collision on the first 4 bytes (32 bits)
+  - generate a 16 byte random key
+  - use the key to compute the SHA-1 HMAC of the page downloaded in the previous exercise
-    # Step 1. Generate 2^16 different random messages
-    # Step 2. Compute hashes
-    # Step 3. Check if there exist two hashes that match in the first
-    # four bytes.
-    # Step 3a. If a match is found, print the messages and hashes
-    # Step 3b. If no match is found, repeat the attack with a new set
-    # of random messages
-    pass
-if __name__ == "__main__":
+==== Exercise 4 ====
-    main()
-</file>
+In this exercise you will implement the Birthday attack on SHA-1 from the previous lab using OpenSSL. The goal is to obtain a collision in the first four bytes of the hash.
+In contrast to previous labs, this time we'll use C. You can implement the attack from scratch, or start from our {{:sasc:laboratoare:birthday.tar.gz|archive here}}.
+To compute a digest, you might find the code below useful:
+<code C>
+    SHA_CTX context;
+    SHA1_Init(&context);
+    SHA1_Update(&context, buffer, length);
+    SHA1_Final(md, &context); /* md must point to at least 20 bytes of valid memory */
+</code>
+<note important>
+To compile using OpenSSL you will need to install the development version of the library which includes the header files.
+Download the library from https://www.openssl.org/source/old/1.0.1/openssl-1.0.1f.tar.gz, and unpack it.
+Open the unpacked folder from bash, and run the following commands:
+<code bash>
+linux$ ./config --prefix=/home/student/local --openssldir=/home/student/local/openssl
+linux$ make
+linux$ make install_sw
+</code>
+To fix the makefile using the new paths, change the variables at the start with the ones below:
+<code makefile>
+LDFLAGS=-L/home/student/local/lib -lcrypto
+CFLAGS=-Wall -g -I/home/student/local/include
+</code>
+</note>